## Link to GitHub Issue, if one exists
#477
## Description of change
Plumb through headphone jack detection. Touch screen menu for headphone
volume lights up.
## Testing
Tested guitar.
## Link to GitHub Issue, if one exists
N/A
## Description of change
in current implementation j32d analog values are not encoded properly,
values are supposed to go up to 1023, but they show up as 771 in game
## Testing
tested with M32-007-2025092400, used DM PAD CALIBRATION menu
## Link to GitHub Issue, if one exists
N/A
## Description of change
prevents the game from creating folders on F: drive
## Testing
tested with M32-007-2025092400
## Link to GitHub Issue, if one exists
#477
## Description of change
Add analog and digital wail for the arena model guitar.
Fix the picking code to be the same algorithm as extdev - detect rising
edges and insert 1 frame of input.
## Testing
Tested x/y/z and digital y up/down. Only Y gets used in game though.
## Link to GitHub Issue, if one exists
#477
## Description of change
Arena cab has two sound cards and it uses `WrappedIMMDeviceCollection`
to set the volume to 100% on boot on both, instead of the typical
`GetDefaultAudioEndpoint`.
## Testing
Testing Delta, testing other games as well as they are affected.
## Link to GitHub Issue, if one exists
None
## Description of change
- Added bi2x_hook
- Added J32D (drum) and J33I (guitar) emulations
- AMI2000 card reader (this game uses this instead of ICCA)
## Testing
Played through a 15-minute session on Drummania.
Guitar mode works with keyboard input.
## Link to GitHub Issue, if one exists
#345
## Description of change
If TDJ / VM mode is active AND user is enabled `-monitor` option (and
the value isn't 0, the primary monitor)
then disable the subscreen overlay, show an error message instead.
We're doing this because both games cannot accept emulated touch input
if `-monitor` option is in use. There is not much point in displaying
the second screen's image, other than to REALLY confuse people when
nothing happens when they click on it.
## Testing
Tested both games with `-monitor`.
## Link to GitHub Issue, if one exists
#345
## Description of change
For IIDX31+, detect if BI2A or BI2X I/O emulation becomes active, and
see if there is a mismatch between the -iidxtdj setting.
Right now a mismatch results in warning in log + deferred error log, but
in the future we could turn this into a fatal error and crash the game
to make it more obvious.
## Testing
Tested 4 combinations:
1. DLL in LDJ mode + -iidxtdj off (pass)
2. DLL in LDJ mode + -iidxtdj on (error)
3. DLL in TDJ mode + -iidxtdj off (error)
4. DLL in TDJ mode + -iidxtdj on (pass)
## Link to GitHub Issue, if one exists
#452
## Description of change
Added `Sleep(4)` call to regulate how fast the `device_io` function will
call `getState` for each button. The panel buttons were commented out
because those are handled by the MDXF Control Status Buffer functions
anyways, so the work was redundant. It's also why the timing precision
from this function doesn't matter, so it can afford a longer sleep
## Testing
- Verified IO still functions properly
- Verified decrease in overall CPU usage
## Link to GitHub Issue, if one exists
n/a
## Description of change
When touch monitors send touch area size information
(`TOUCHEVENTFMASK_CONTACTAREA` flag and `cxContact` / `cyContact` fields
of `TOUCHINPUT` struct) from `GetTouchInputInfo`, IIDX gets confused and
does some unexpected things when interacting with the subscreen.
As a workaround, hook `GetTouchInputInfo` and clear out the flag &
values.
This is only done for IIDX AND when -iidxnativetouch is on.
## Testing
Tested on a Dell touch monitor, simulating "bad" values.
## Link to GitHub Issue, if one exists
n/a
## Description of change
`acmFormatSuggest` is known to cause significant perf issues on Linux;
add a hook to return cached results.
The fix is only active in the Linux variant.
For discussion, see
* https://codeberg.org/nixac/spicetools/issues/2
* https://codeberg.org/nixac/spicetools/issues/4
## Testing
I've only tested this on Windows, checking if iidx and popn can boot,
play songs without audio issues.
## Link to GitHub Issue, if one exists
n/a
## Description of change
Currently when 'bio2' specified on 'io' parameter of app-config the game
crashed due to security code check.
These codes changes security code to corresponding one and adds fake
BIO2 entry to satisfy BIO2 check.
## Testing
Tested with MDX-003 and J:I:B ident.
The game boots and A3 now displays gold cab theme and displays MATCHING
GROUP, MATCHING SIDE on NETWORK OPTIONS test mode menu.
## Link to GitHub Issue, if one exists
Fixes#432
## Description of change
Newer versions of iidx33+ reintroduces `SOUND_OUTPUT_DEVICE` env var.
iidx module must account for its return
## Testing
## Link to GitHub Issue, if one exists
#345
## Description of change
Warn user via warning message in log + auto-troubleshooter entry when
-monitor option is used in full screen with TDJ and UFC mode.
This covers yet another case where TDJ subscreen does not respond to
mouse clicks (because the game expects them to come through the primary
display). For UFC, -monitor usually results in a failure to create DX
adapter.
## Testing
Manual verification with TDJ/UFC modes and two monitors.
## Link to GitHub Issue, if one exists
For #345
Similar idea as https://github.com/spice2x/spice2x.github.io/pull/350
## Description of change
Disable camera access by default by setting `CONNECT_CAMERA` environment
var to 0 before launching. This was one of those "required" things
people clicked on, but now it's done automatically to reduce friction
for new users.
On cab setups (i.e., running without -iidx module), cameras will remain
on, unless user overrides it.
On franken setups (partial I/O) - user will need to specify what they
want via the new option, we can't guess correctly.
## Testing
## Link to GitHub Issue, if one exists
n/a
## Description of change
HG cabinet uses wintouch and it requires TOUCHEVENTF_PRIMARY flag in
order to accept touch inputs.
Added wintouchemu on game hook and TOUCHEVENTF_PRIMARY flag on
wintouchemu.
## Testing
The game boots into test menu, touch now works. (tested in I/O TEST ->
TOUCH PANEL CHECK with '-s' flag)
TDJ subscreen overlay and nostalgia seems works fine regardless added
TOUCHEVENTF_PRIMARY flag but more testing required.
## Link to GitHub Issue, if one exists
Fixes#393
## Description of change
- Fixes compatibility with IIDX 33
- Adjusts the pattern scan for "hook A" to be compatible with IIDX 27
- Refactors texture replacement to use Camera::CCameraManager2, removing
the need for a second hook
Related: https://github.com/aixxe/2dxcamhook/compare/0.4.0.0...0.5.0.0
## Testing
Booted with `-iidxcamhook` on IIDX 27, 28, 29, 30, 31, 32 & 33
Confirmed both cameras were visible in I/O test, music select settings &
gameplay
## Link to GitHub Issue, if one exists
n/a
## Description of change
They moved some DLLs around so MFC wasn't being auto-detected, and I/O
hooks were not being performed. Fix that.
## Testing
The game boots into test menu, some i/o works, touch doesn't, not
playable yet.
## Link to GitHub Issue, if one exists
#345
## Description of change
When `ea3-pos: ea3_report_posev: no such node:` is detected, add a
deferred error message and guide user to the FAQ.
## Testing
Tested SDVX with the missing XML node.
## Link to GitHub Issue, if one exists
#410
## Description of change
When raising fatal errors via `log_fatal`, also show a modal popup.
Update instances of `log_fatal` where the message was too long to fit.
## Testing
Tested various failure conditions.
## Link to GitHub Issue, if one exists
#345
## Description of change
Add auto-troubleshooter messages for when audio hooks are disabled, and
when 9on12 is turned on by user.
## Testing
Manual verification
## Link to GitHub Issue, if one exists
Fixes#403
## Description of change
Set CONNECT_CAMERA env var even when iidx module is not enabled, so that
camhook can work without -iidx being set with real IO
## Testing
tested with emulated i/o and real i/o by user (see linked issue)
## Description of change
iidx: 9on12 crashes iidx31+
popn: special message for createdevice failures (resolution issue)
## Testing
manually test both cases
## Link to GitHub Issue, if one exists
#388
## Description of change
Instead of setting flags in `signal` and logging when we crash, create a
class for logging deferred semi-fatal messages, and dump them to the log
immediately before crashing or shutting down.
## Testing
Tested each failure case by injection.
## Link to GitHub Issue, if one exists
none
## Description of change
Supports PCM version 2024091200.
## Testing
1. After starting the PCM, touch card and auth.
2. Press the bill insert button.
3. Check account balance has increased.
## Link to GitHub Issue, if one exists
n/a
## Description of change
Apply this fix automatically when needed -
https://github.com/two-torial/sp2xpatcher/pull/33
## Testing
Tested iidx31 to see that the patch does not apply
Checked -audiohookdisable to see that the logic gets skipped
Tested 2025041500 and 2025082500.
## Link to GitHub Issue, if one exists
n/a
## Description of change
Add lights output for the buttons lamp array. Only implemented the top
row of lights and not all of them, this is good enough.
## Testing
Tested with a Nostroller and also spiceremote.py.
## Link to GitHub Issue, if one exists
#345
## Description of change
If we see SuperstepSound failure during boot, remember it, and when the
game eventually crashes, log a series of warning messages to surface why
the game likely failed to launch.
## Testing
Tested both iidx and sdvx with an audio device set to not allow
exclusive mode.
## Link to GitHub Issue, if one exists
n/a
## Description of change
Add a new option that allows absolute position analog input, such as
SDVX controller knobs and IIDX turntables, to be bound as input for
Polaris Chord faders.
In practice this means turning a knob counter-clockwise results in fader
being held left (relative to velocity), and vice versa.
## Testing
Tested using FauceTwo and a mouse.
## Link to GitHub Issue, if one exists
#345
## Description of change
If `-exec` is specified, log a giant warning.
Also, fix some compiler warnings in MFG.
## Testing
Confirmed message being logged in log.txt.
## Link to GitHub Issue, if one exists
Fixes#364
## Description of change
The game attempts to hook raw input, but raw input API can only be used
by one window per process. Hook `RegisterRawInputDevices` and prevent
the game from registration for raw input notifications.
## Testing
Tested that HID keyboard works with `Bind` option.
## Link to GitHub Issue, if one exists
Fixes#365
## Description of change
Always check both analog and digital input when calculating fader
offset.
## Testing
Tested with keyboard and xbox one controller.
## Link to GitHub Issue, if one exists
n/a
## Description of change
Adds support for Polaris Chord
## Testing
Tested with XIF:J:A:A:2024122300. IO/ICCA works, game successfully
connects to server and is playable.
## Link to GitHub Issue, if one exists
#345
## Description of change
Check if the path to codecs directory contains non-ASCII characters, and
display a giant warning. This is to help with troubleshooting, since
registration of xactengine silently fails (creates a bad registry entry)
if the path contains non-ASCII chars.
Log the size of codec DLLs, and log any failures from `regsvr32`.
Detect the case where user specified `-exec gamemdx.dll` for DDR which
seems to be a common pitfall. This doesn't work because gamemdx.dll does
not have a DLL entry, but for some reason people are really tempted to
do this.
## Testing
Validated the error cases.
## Link to GitHub Issue, if one exists
#345
## Description of change
Account for the path to codec DLL having spaces in it and use wide
chars.
## Testing
Testing 32 and 64 bits.
## Link to GitHub Issue, if one exists
#345
## Description of change
On launch of spice.exe / spice64.exe, call `regsvr32` on known codecs in
the `com` directory.
Add an option to skip this (`-ddrnocodec`) as a chicken bit.
## Testing
Tested 32 and 64 bit DDR.
## Link to GitHub Issue, if one exists
#345
## Description of change
Simplify camera hook in SDVX5/6. Camera hook will always be installed
and return 0 cameras.
Deprecate `-sdvxdisablecams` option as it is no longer needed as a
result of this change.
## Testing
Tested SDVX5 final, SDVX6 year 1, and a recent SDVX6 build.
## Link to GitHub Issue, if one exists
#41 (partially)
## Description of change
This PR adds support for outputting IIDX tape LED data via spiceapi
(`iidx_tapeled_get()`). It returns the data as a `dict`, with the key
being the LED name and the value being the list of RGB values. You can
optionally pass in a variadic list of names to filter the returned data.
The new API function is only implemented in Python since I'm not able to
test the wrappers in other languages.
An example script using the new API is available in this Beef Board PR:
https://github.com/HWXLR8/beef-board/pull/133.
Demo use case: https://streamable.com/pq5e1e
## Testing
Tested in IIDX 32 with custom Beef Board firmware along with a Python
script to read and send the tape LED data over USB.
## Link to GitHub Issue, if one exists
n/a
## Description of change
Rotate the printer output so that it's the correct orientation
(portrait, not landscape).
## Testing
Tested via test image, and also in-game, for LP and SDVX.
bicarusandGitHub
oleg238948234andGitHub
zxcwdtaandGitHub
cchikeandGitHub
duel0213andGitHub
aixxeandGitHub
s2andGitHub
sp2xdev
GEEKiDoSandGitHub
ASleepyCatandGitHub