## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Prevent the game from launching a blank window when launching fullscreen
with sub disabled.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#814
## Description of change
Remove iidx/sdvx/popon `native touch` options.
Remove dead code in wintouchemu that deals with these games.
Native touch is now at feature-parity with wintouchemu. Native touch
options work better with touch screens, while rawinput-based wintouchemu
has compat issues on some touchscreens. For these subscreen games
deprecate the usage of wintouchemu and make them use native touch stack
by default.
### For future consideration
Gitadora - not sure what to do with this one. We only use wintouchemu
for the single window case. For all other configurations, the game
accepts mouse and touch input without any hooks, so perhaps nothing
needs to be done here.
Nostalgia - consider moving away from wintouchemu and adopt native touch
hook here as well.
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
User reported
## Description of change
Sometimes the game moved the main window after `CreateWindowExA`
returned but before D3D initialization called
`graphics_capture_initial_window`. During this gap,
`GRAPHICS_HOOKED_WINDOW` was not set, so the placement hooks could not
identify the main window and preserve its monitor override. GITADORA
main, LEFT, and RIGHT windows are now registered immediately after
creation so later placement calls cannot undo their overrides.
This also adds `-gdwsmallsize` and `-gdwsmallpos` for explicitly setting
the SMALL window size and position. Explicit values override the
corresponding monitor-derived geometry, allowing the SMALL window's
10:16 aspect ratio to be preserved instead of stretching it to fill a
monitor.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Refactor patch manager.
This one file had the UI logic, config save/load, parsing patches JSON,
applying memory patches, everything all in one cpp file. Refactor and
separate out the layers.
## Testing
Sanity checked patch workflows.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#800
## Description of change
Restores keyboard navigation by default in spicecfg, and add an option
to optionally enable it in the overlay.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Similar to #797, draw an overlay to debug touch issues for reflec beat.
For rb, we draw on the ImGui surface. Draw horizontal and vertical line
for triggered sensors, and also a bounding box if scaling is in use.
Make small tweaks to how scaling works.
## Testing
Verified volzza 2 / reflesia / 1st game (landscape KBR)
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Debouce option for touch input. Applies to all touch handlers (rawinput,
win8, win7) since it sits at the touch layer, and then consumed by jb
touch logic.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
related to #697
## Description of change
Add a new option that paints touch targets and touch points for jubeat;
gets enabled if there is a touch screen connected. This is to help
explain / debug issues when users have their touch screen issues, which
is usually due to misalignment.
Fix the touch targets being off by 1 pixel (center gap is 1px wider in
both directions).
Also, simplify the `improved` algorithm to simulate a finger and trigger
nearest-neighbor for the AC dimensions. In terms of touch performance
this is near identical to what we had before, but it allows us to draw a
nice debug overlay instead of just grids.
## Testing
Tested portrait and landscape versions of jb.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Two changes:
1. Handle all HID events in `WM_INPUT` and not just the first one. This
only really affects 4000Hz / 8000Hz HID devices.
2. Go back to `3x3` as the default for rb IR touch emulation and remove
`1x1` as an option as it does not perform as well as I expected.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#697
## Description of change
Adds aspect-ratio compensation for raw input touch handler.
This addresses the problem with playing rawinput touch games - namely
jubeat and reflec beat - on a display that is not 16:9, and user chose
to preserve the aspect ratio. This happens a lot on:
* 16:10 touch screens
* touch screen laptops (which range from 3:2, 16:10, and so on).
Root cause is a **Windows Raw Input limitation**. Unlike
`WM_POINTER`/`WM_TOUCH`, where the OS already maps digitizer coordinates
to screen space (applying the display's calibration/scaling), Raw Input
delivers the HID digitizer's *raw* logical coordinates, spanning the
whole physical panel, with **no calibration or display-mapping data
attached**. We have to reconstruct that mapping ourselves.
When a game runs at a display mode whose aspect ratio differs from the
panel's native resolution, Windows scales the image with
letterboxing/pillarboxing (black bars). That is standard OS/GPU
behavior. Because Raw Input gives us no mapping to account for those
bars, touches land off-target. This change detects the mismatch and
remaps each touch from panel-space into the displayed image region;
touches inside the black bars are treated as released.
Adds new launcher option **`-rawtouchaspect`**.
Notes:
- Native resolution is the largest-area mode from `EnumDisplaySettings`
on the **primary** display, consistent with the existing primary-only
touch pipeline.
- Math assumes centered, aspect-preserving scaling; only one axis is
ever inset.
- A small epsilon (0.01) makes near-matched panels (e.g. 1366×768 vs
true 16:9) a no-op.
- If the user forces a stretched image, then the touches will be off
again. In this case, the user needs to use the `force off` setting.
## Testing
On my tiny Surface Go tablet,
* checked that jubeat squares align correctly
* good enough to full combo level 11 for reflec beat
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
`-network` and `-subnet` are poorly named. Add new names for them that
are more explicit.
Old command line parameters will continue to work, this is an additive
change.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds an option to disable Live2D. Can be disabled everywhere, or just
during a song.
## Testing
Tested EG final and recent Nabla.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds an overlay window widget for controlling OBS over WebSocket.
Add new lines to the FPS widget that shows recording / streaming timers.
Show notifications for major state changes (stream started/stopped,
recording started/paused/resumed/stopped)
## Testing
DLL hook options (-k and -z) allow multiple flags being specified in
both spicecfg and via command line; they never conflict as they are
additive. Remove the warning about option conflicts.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Similar to how it is on SDVX, turning this on can cause graphical
glitches depending on the GPU, so it needs to be an option that users
can toggle.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#762
## Description of change
Fix -nolegacy causing input to be not processed in spicecfg
Need to fix `run_cfg` and `CONFIGURATOR_STANDALONE` for real soon.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
For cab usage, when `-exec bm2dx.dll` is used without `-iidx` then
SOUND_OUTPUT_DEVICE never gets set.
Change this so that `SOUND_OUTPUT_DEVICE` gets set unconditionally if
`-iidxsounddevice` is set.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Combine API/Options/Advanced/Development/Search tabs into one Options
tab and add a left nav for navigation categories.
Reduce information density for options table by making each row double
the height and slightly increasing widget sizes.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#73
## Description of change
Generated cards now start with E0040100 to fully match real cards. The
placeholder example `E004010000000000` is replaced with
`E0040100FFFFFFFF`.
The invalid placeholder/fallback PCBID `04040000000000000000` is
replaced with `01201000000000010101`, which contains a valid
header/checksum, making it closer resemble a real PCBID while still
clearly being an example.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
This new option, `-wasapishared`, detects when the game opens WASAPI
Exclusive stream and forcibly opens a shared mode stream instead on the
real device.
#### Benefits of this:
1. No need for `force wasapi shared` patches
2. No need to change sample rate of audio devices before starting up
games
3. Adds ability to boot in shared mode even for games that do not have
shared wasapi changes (old GITADORA, popn HC)
As a result, this option is strictly better than `shared wasapi` patches
available for many games.
#### Downsides:
1. OS resampling will add a small latency, but not big enough to be
noticeable.
2. Using shared mode instead of exclusive mode adds latency, of course.
(If you cared about latency, you would use the low latency option, or
use exclusive or asio)
Basically it's the "make things work" button for audio that should work
for almost all games that we support.
The option has no effect if the game opens in shared mode.
## Testing
SDVX7 - ok
GITADORA GW - ok
popn HC - ok
IIDX - ok
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Create three distinct layers for the overlay:
1. Bottommost persistent layer - non-interactable layer that is always
on. This was only for notifications, but now the FPS widget lives here
as well.
2. Overlay windows layer - most interactable windows go here.
3. Topmost main menu - this is reserved for the main menu (escape key)
and this is a modal dialog that occludes the layers below.
Why?
- `toggle overlay` behavior with FPS widget *also* toggling on/off was a
bit confusing (now they're two separate keys)
- FPS widget is popular, but it caused the entire overlay to be active,
which affects how input is handled
- the main menu being a standalone window was a little awkward (now it's
a modal)
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#730
## Description of change
Add an option that extracts channels from 7.1 ASIO and presents to 2-ch
ASIO. Same idea as the SDVX 2ch fix except for gitadora we are
duplicating the center channel to front.
## Testing
Tested SDVX and GFDM Arena.
## Link to GitHub Issue or related Pull Request, if one exists
#730
## Description of change
Flip the option - enable the Realtek hack by default, unless the user
chooses not to.
## Testing
Tested ASIO path and WASAPI path. WASAPI path should be unaffected as
the game just picks the default audio device.
## Link to GitHub Issue or related Pull Request, if one exists
#730, #718
## Description of change
Part 1)
When ASIO is in use, the game also looks for a Realtek device so that it
can open a WASAPI Exclusive mode stream for headphones.
Add an option to fake that, in case the user doesn't have a Realtek
device.
Part 2)
`-gdaasio` wasn't workign properly - fix the logic.
## Testing
Seems to work with FlexASIO, and Xonar with no real Realtek device.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Create `WrappedAsio`, similar to how we wrap `IAudioEndpoint`
So far, the wrapper does these things:
1. logging (for diagnosis, since iidx and gfdm don't produce any logs
when asio succeeds)
2. iidx32+ hack to work around refcount mismatch issue
3. sdvx valk cab hack to force 2-channel audio ("downmixing" by taking
only the front channels)
4. honor volume boost
As a result of `#2` the mempatch was removed from `iidx.cpp` since we
can tackle it cleanly in the hook. `#3` also removes the need for manual
patches.
Real downmixing is hard & expensive on the CPU so it was not
implemented.
## Testing
Tested iidx/sdvx/gfdm with xonar and flexasio
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Resampler:
Implement resampler for exclusive mode streams, as we are seeing more
and more devices - not just laptops but onboard audio devices - that
only support 48khz and not 44.1khz. Should work with volume boost (gain
calculated inside resample) and also downmixer (hands off intermediate
scratch buffers).
Buffer size increase:
By default many of these games request a tiny buffer when in shared mode
(TDJ uses 3ms). On some audio setup this results in crackling due to
underflow. Add an option to forcibly increase the buffer size.
## Testing
With resampler set to 48kHz and buffer set to 20ms I can reliably boot
and play IIDX on my display port monitor's speakers; previously this
wasn't possible. IIDX is event-driven.
Tested SDVX7 as well at 48kHz, which opens timer-driven streams.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#717, fixes#647
## Description of change
Adds an option to downmix surround sound (5.1, 7.1, etc) down to stereo
(2 speakers). This can be used in most WASAPI games, including Gitadora
and FTT.
How it works: when the game tries to open surround format (say, 7.1) we
create a fake buffer and tell the game that it is supported. In reality
we open a 2-channel stream with the real sound card. When the stream
begins, we downmix the channels down to two (using one of many
algorithms) and output to the sound card.
While we're here, implement an option to boost the game volume by some
decibel value, which is a feature often requested by SDVX players. This
was needed since downmixing can sometimes result in quieter audio.
## Testing
Tested GW Delta and FTT.
Downmix doesn't work on IIDX (32 bits) but volume boost works.
## Link to GitHub Issue or related Pull Request, if one exists
N/A
## Description of change
Adds GITADORA Arena windowed monitor layout options for the GITADORA,
LEFT, RIGHT, and SMALL windows.
This also applies the selected window border style to all four GITADORA
Arena windows, and allows the SMALL touch window to be resized in
windowed mode while keeping touch coordinates updated.
## Testing
- Manually tested GITADORA Arena windowed mode:
- default, resizable, and borderless window styles
- per-window monitor placement
- SMALL resize
- SMALL touch coordinate mapping after resize
## Link to GitHub Issue or related Pull Request, if one exists
#717
## Description of change
Add an option to override the ASIO device.
By default the game will try to use any ASIO driver that contains the
string `XONAR` in it.
## Testing
Tested with FlexASIO.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#134
## Description of change
Add ImGui DX11 backend implementation, and integrate into the spice
overlay.
The tricky part is that some of the Unity games:
1. Launch multiple windows, and
2. Can be resized (even full screen games launch at a certain resolution
and then expand to fit desktop resolution)
3. lazy load DX11 DLLs
This PR also adds screenshot functionality, but screen resize is not
implemented.
## Testing
Seems to be working for most games. Need to do final tests for:
- [x] CCJ (attract movie plays as well)
- [x] Busou Shinki (title movie plays)
- [x] MFG
- [x] QuizKnock
- [x] Polaris Chord
- [x] check dx9 for regression
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Combine the two layout options into one
## Testing
- [x] windowed, x4
- [x] windowed, x2
- [x] windowed, x1 with sub
- [x] fs
## Description of change
Added an option to only disable the left/right screens of gitadora gw
delta while exposing the touch panel screen.
## Testing
Tested by hand on CachyOS + hyprland + gamescope + wine + vnc + phone +
cat 🐈⬛
<img width="2560" height="1707" alt="image"
src="https://github.com/user-attachments/assets/a2ef0172-68e2-43c2-89c3-4863698f2f00"
/>
bicarusandGitHub
drmextandGitHub
SelundineandGitHub
AzaleaandGitHub