## Link to GitHub Issue or related Pull Request, if one exists
Continuation of #682
## Description of change
RB uses SleepEx, so it was missed during the search while working on
#682.
## Testing
Plays about the same on a 200Hz touch monitor.
## Description of change
There was enough feedback that the current algorithm is not ideal for
most touch screens because most touch screens are not 24". In the
current algorithm touching the gap is no-op, so people think the game is
dropping touches.
This PR introduces a new algorithm that inspect touches on the gap and
triggers the nearest square.
## Testing
Tested landscape and portrait jubeat.
## Link to GitHub Issue or related Pull Request, if one exists
continuation of #677
## Description of change
When overlay was hidden, when mouse buttons were clicked, they were
queued up and replayed when overlay became visible again.
This is due to improper usage of `GetAsyncKeyState`, per documentation.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#681
## Description of change
`Sleep` and `sleep_for()` can be very inaccurate and varies depending on
what the OS gives us...
### `timeBeginPeriod(1)`
On boot, we are now calling `timeBeginPeriod(1)`, which affects the
whole process but makes `Sleep` more accurate. There is some risk here
if any game was relying on doing things like `Sleep(1)` and expecting it
to run for 15.6ms. Most games already call `timeBeginPeriod(1)` in the
game engine, though not the whole time, so I'm hoping that this is not
too impactful.
### Opt out of Win11 power throttling
Ensure that timer resolution change above is respected even when the
window is occluded / minimized by opting out of throttling via
`PROCESS_POWER_THROTTLING_IGNORE_TIMER_RESOLUTION`.
### Use Win10 high resolution timer instead of Sleep
On Win10 1803 and above, there is a new OS-level API for high resolution
timers; if this is available, use it
(`CREATE_WAITABLE_TIMER_HIGH_RESOLUTION`). Worth noting that WINE
doesn't support this currently.
If not, fall back to `Sleep`, which is significantly better than
`sleep_for()` in my experiments.
Callers of Sleep / sleep_for were replaced with this new timer. Most of
them anyway; calls to Sleep() with more than 100ms+ was left alone.
### Add an option as a chicken bit
To opt out I'm adding a new option called `Use Legacy Timers` which will
revert to behavior before this PR. The code paths that switched from
`sleep_for` to `Sleep` will remain in place though, not affected by the
option.
## Expected changes
In some I/O emulation modules, poll threads may run more frequently,
resulting in lower latency.
It also means that spice overall may use more CPU resources and power.
If you don't like this, you can always enable the option to opt out;
e.g., if you're on old arcade cab PC.
## Testing
DDR p4io - ok
drs touch hook - ok
IIDX camera hook - ok
CCJ trackball - ok
## Link to GitHub Issue or related Pull Request, if one exists
#181
## Description of change
Implement analog relative mode and delay option using a new
millisecond-based algorithm.
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
#181
## Description of change
Use millisecond-based calculation to add artificial delay to the TT
input.
## Testing
Tested 64 bit TDJ and LDJ.
## Link to GitHub Issue or related Pull Request, if one exists
Re-implements fix for #181 as it was removed by #668
## Description of change
Add two options to add artificial delay to turntable input. These
operate directly on the input logic (`get_tt`) which is called by I/O
emulation code.
Functionally, it's **identical** to the `Delay (experimental)` option we
had in the analog tab, just moved to Options tab.
## Testing
64 bit tdj: ok
64 bit ldj bi2a: ok
32 bit ldj ezusb: ok
Worth noting that TDJ bi2x_hook polls at 120Hz, bi2a at ~500Hz, and
ezusb at ~170Hz
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Currently, all analogs are treated as circular values that wrap around.
This works for knobs and turntables, but can get weird for linear values
(like tilt sensors and sliders) especially once analog options are
enabled, such as sensitivity.
This PR groups analogs into 3 buckets: circular, linear (centered), and
linear (positive). Linear types get different algorithms applied to it
when options are set (e.g., sensitivity caps out at 0, 1 instead of
wrapping around).
In linear mode:
* Sensitivity value applies an exponential response curve (power curve)
to the original value.
* Multiplier/divisor serves as a linear cut-off.
* Relative mode works as you expect, but of course, values don't wrap
around.
* Invert and deadzone work as you expect (since they applied to the
controller input anyway)
* Smoothing is removed from the UI and has no effect.
* Delay is unaffected.
Also, fix a small bug with -/+ button not working for analog `Delay`
option.
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Some crappy DDR soft mats (either USB-based or console pads with crappy
adapters that lack a dedicated "DDR pad mode") use X and Y analog axis
for arrows, which means they cannot cleanly report Up+Down or Left+Right
input.
According to some ancient Stepmania code, a lot of these report a middle
value (value between center and right, for example, for left+right).
Borrow this hack from Stepmania and implement it in spice as analog
input for DDR.
Also, for rawinput/xinput automatic bind scenario, update the logic so
that face buttons are always detected before analog axis / dpads for
consistency. This would help with binding any DDR pads that
simultaneously input face buttons / dpad / analog axis, so that we can
prefer face buttons when detected.
## Testing
I don't have any soft mats that have this, but it was tested with an
xbox controller.
As noted in #567, a filesystem path that contains non-ascii will break a
lot if using a clang toolchain.
Luckily, fmtlib has a lossy utf8 convert when you use it to print a path
(after including `fmt/std.h`). The vast majority of this diff is just
removing `.string()` from paths inside loggings calls.
There are some callsites I _didn't_ touch, mainly the options, because
it would be an ABI break to change those to be wide strings and I cbf
looking into settings upgrades. There are also some spots (avs mountpath
remapping, for example) where the path is guaranteed to be ascii, so I
didn't modify them.
ImGui doesn't appear to easily support wide strings (I mean, surely it
does, but I'm not gonna look too far into it) so I mostly just left
those alone too, with a few spots modified to re-use fmtlib's lossy
utf8.
Some of the changes are basically never gonna be hit IRL, like who would
put a file with a non-ascii _extension_ along with their modules? But
the diff is (I hope) pretty easy to validate as OK.
Testing has been somewhat minimal, I fired up the GCC build of spice2x
in a dodgy folder name, got mojibake (running via wine in linux so take
that as you will), ran the unmodified clang spice and crashed the same
way the reporter did. After modification, I get the exact same mojibake
so I assume if the terminal enjoys utf8 it'll display OK.
Claude (only used for review) thinks the commit is fine but is annoyed
that I use `fmt::detail` in the appdata censoring, which is part of the
private API; personally I don't care because it's pretty stable.
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
Add rest of the LED strip lights.
## Testing
Tested U region.
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
Wire up coin and more lights to bi3a_hook.
## Testing
Tested on U region
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
Take the monitor hooks added for IIDX/SDVX #612 and apply it to popn as
well now that popn has a subscreen.
There is a debug option in game that actually uses three monitors, which
can be activated via hex edits. This will prevent that from working.
## Testing
Tested with 3 monitors, fs and windowed.
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
The game insists on having two monitors. Hook various DX9 and Win32
monitor APIs to fake a monitor if the user only has one. This correctly
convinces the game that it needs to draw two screens instead of just
one.
## Testing
WIP
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
Add overlay for subscreen.
Add an option for no subscreen window.
Use the same "force redraw subscreen" logic we used in SDVX to fix the
same issue.
Known issues:
* still crashing when running windowed if there is only one monitor
* having only one monitor causes sunscreen overlay to not work
(NumberOfAdaptersInGroup issue?)
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
Basic support for lights - subwoofer RGB and button lights.
## Testing
Tested on title screen and in-game.
Tested beat pop as well since that lights up the colors in white/blue.
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
Turns out running this with bi2x doesn't process buttons properly, so we
have to use bi3a.
## Testing
Seems playable now.
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
Implement BI2X hook I/O for service/test/coin/headphones and the deka
pop-kuns.
## Link to GitHub Issue or related Pull Request, if one exists
#618
## Description of change
The game expects the main display to be *not* HDMI, and at port 2.
Hooking DisplayConfigGetDeviceInfo allows us to boot the game on any
monitor.
Add basic I/O hook. It gets stuck in `USB I/O Checking...` for a couple
minutes but it'll eventually skip and boot to title screen.
## Testing
ugh.
## Link to GitHub Issue or related Pull Request, if one exists
#345
Hoping that #180 is also addressed by this change, but I can't test it.
## Description of change
IIDX (TDJ) and SDVX (Valk) will now be able to boot in full screen even
with 3 or more monitors attached.
spice will "hide" from the game any monitors other than the primary
monitor and one other monitor for subscreen, allowing it to boot without
crashing - accomplished by clearing `DISPLAY_DEVICE_ATTACHED_TO_DESKTOP`
flag when monitors are enumerated over `EnumDisplayDevicesA`, and
fortunately both games seem to respect that flag.
Add options (one for IIDX, another for SDVX) that lets you specify the
monitor ID of the second monitor.
When the option is set, user-specified monitor will be used as the
subscreen. When the option is not set, spice will just pick the
lowest-indexed monitor as the subscreen, not counting the primary one of
course.
## Testing
Tested both games with three monitors. Should probably work for four or
more.
This was a lot more background work than expected, but that is the
nature of unnecessary hobbies I guess. Most things in here are obvious,
so here's the non-obvious thoughts and notes:
1. All the XP stuff is optional, if the toolchain isn't available it
won't even try
2. The docker build is the "known good" build and now has all the
required tools for XP and checking binaries
a. If you're OK with it, can add the XP_MUST_BUILD flag to
build_docker.sh
4. New `SPICE_XP` flag to comment out blocks
5. We could technically build using the Docker image I've made for my XP
compatible LLVM toolchain, but combining the binaries into a single zip
at the end of it is somewhat tedious, so I've chosen to grab the
binaries from my release
6. I also wrote a DLL checker to make sure the final binaries are
_actually_ XP compatible, which found some issues on x86_64 (I don't
know a single game that runs on 64 bit XP, but it wasn't too much effort
so whatever). This also won't run if missing, just to save the trouble.
7. The build script is still pretty shit, I've made some minor
improvements
a. `/usr/bin/env bash` instead of `/bin/bash` as it's more correct
b. Adding `-it` to the docker build, so Ctrl+C actually halts it
c. Main issue is that failures don't halt, because of the custom error
catching function. This has caused a lot of frustration, maybe we can
change that
## Testing
It runs on 32 and 64 bit installs of XP. My jubeat cab is on Win10 these
days and I haven't got around to testing an actual game, but I've
distributed test builds of this to people who *have* confirmed it works
as expected.
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Fix random crashes with CCJ.
This should remove the need to add `d3d10warp.dll` to `
preload_libraries` in `ee-config.xml`.
## Testing
Tried a couple games and didn't run into the crash..
## Link to GitHub Issue or related Pull Request, if one exists
N/A
## Description of change
Move `dirs_created` flag assignment before `dir_create_recursive` calls
in `CreateFileW_Hook` to prevent stack overflow. `dir_create_recursive`
calls `_wstat64` (ucrtbase), which internally calls `CreateFileW`,
re-entering the hook before the flag is set. GCC 13 preserved the source
order, but GCC 15 reorders the flag store after the function calls,
causing infinite recursion.
Note: I'm not fully confident the root cause is specific to GCC version
differences. Also, I cannot determine whether this directory creation
hook is truly necessary. Without these directories the game boots but
quizzes won't load, making gameplay impossible. It may be worth removing
this hook entirely, but for now this fix is needed to prevent the crash.
## Testing
Verified title screen transition on LMA-2019022700. Crashes on the
latest build without this fix.
## Link to GitHub Issue or related Pull Request, if one exists
#576
## Description of change
Add `Reset All` buttons to these tabs which clears out bindings to none
/ default.
For keypads, introduce a special `Use Preset` button which lets users
pick between numpad and top row number keys.
Update UI-visible string used for vKeys, especially the numpad ones
(e.g., `.` is now `Numpad .` to distinguish from the regular `.`
period).
Breaking change: if the user never had `P1 Keypad 00` set, the default
will change from `Enter` to `Numpad -` since both enter keys trigger the
same. This will affect a small number of popn/ddr players. They can just
change it back.
## Testing
*how was the code tested?*
## Link to GitHub Issue or related Pull Request, if one exists
#574
## Description of change
Refactor so that grouping of lights are in common I/O code. Add this to
IIDX/SDVX/DDR/GitaDora.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
related to #154 though this PR doesn't fix it
## Description of change
1. Add an option for cam hook so that the game can be launched without
any camera
1. Rotate image printed out by print-to-file so that it's right side up
(portrait orientation)
## Testing
Able to boot the game without any cameras, and tested printing in test
menu.
"Holo" printing remains broken.
Logic was wrong; caught by compiling with a newer clang and it raising a
warning about the useless expression (since the second clause always
eval'd as true).
Changed to the intended functionality, but I have no ddr3 with p3io so I
can't test it. But it seems nobody ever really noticed this.
- Include order and forward decls were breaking button.h because a
declared but not defined struct can't be initiated (honestly this file
was cooked, crazy include order).
- `MAXINT` is GCC specific, `INT_MAX` is portable.
- InterlockedDecrement takes a LONG, not ULONG
- an imgui printf-style call using a direct string instead of %s (let's
ignore the fact that it's actually safe based on how the str is
constructed)
- missing `override` on a virtual subclass
- `CALLBACK` on a lambda threw me for a loop, but I believe moving it
after the arg list is the correct approach (see if it builds on gcc I
guess)
- `std::result_of` was removed in C++20, which the project is built with
## Link to GitHub Issue, if one exists
n/a
## Description of change
Game expects primary monitor to be in 90 deg rotation, and does the
touch calculation accordingly.
If the user does 270 deg rotation ("portrait, flipped") then the game's
touch calculation is flipped upside down. Detect this and provide the
fixed up values in the touch hook.
## Testing
Tested with SDVX in 90 deg, 270 deg rotation, and 1080p, forced 1440p.
## Link to GitHub Issue, if one exists
#345
## Description of change
When DLL is configured to use TDJ I/O but spice is in LDJ mode, show an
error in LED ticker suggesting the user to turn on `-iidxtdj`.
When DLL is configured to use LDJ I/O but spice is in TDJ mode, show an
error in TDJ overaly suggesting the user to fix the DLL.
Fix a small bug that caused a white window to be created when `-w` is
enabled even when `-iidxtdj` is not, but DLL is using TDJ I/O.
## Link to GitHub Issue, if one exists
## Description of change
Some parts of the UI (e.g., Card tab) rely on early auto detection of
the game, which relies on file hints and not the game code. Two games
(PC and MFG) rely on directory presence and not file presence.
## Link to GitHub Issue, if one exists
n/a
## Description of change
Before this PR, drums were in the order they appear in test menu.
This is really confusing. Change it so that they appear in the order
they do in default drummania layout.
## Testing
validated manually in gw
## Link to GitHub Issue, if one exists
n/a
## Description of change
Adds an option to pick from four algorithms for guitar picking input.
The default behavior is being switched from legacy (rising edge only,
always 1 frame of input) to SOCD "prefer recent" algorithm. This makes
it slightly easier to navigate the menu with the guitar.
## Testing
Validated gw, gwdelta, and sdvx just in case.
## Link to GitHub Issue, if one exists
n/a
## Description of change
Add plug&play hooks for RGB camera in DRS.
## Testing
Seems to work with my crappy Logitech C270
Camera options (brightness etc) seem to work in test menu as well).
Tested by another user with realsense camera + logitech camera, both
cams were detected correctly.
## Link to GitHub Issue, if one exists
similar issue as #499
## Description of change
Fix broken bi2x_hook implementations that did not properly allocate I/O
buffers with correct sizes.
People keep copy-pasting other implementation that allocate 0 bytes of
memory, but we run the risk of memory corruption or/or game crashes if
we keep doing this.
We've seen some mystery crashes with CCJ for example, maybe this will
fix that.
While I'm here, implement SOCD cleaner for Polaris Chord.
## Testing
Tested I/O menu with CCJ, play through tutorial (didn't test matches)
Tested GWDelta (test menu and a few songs in guitar)
Tested PC (played a credit)
Tested QKS (still can't get past the title screen)
## Link to GitHub Issue, if one exists
#477
## Description of change
This is a work in progress.
What works:
- [x] subscreen overlay shows the touch screen image (in windowed mode)
- [x] touch works in the overlay
- [x] only the main window is shown, other windows are not launched
What doesn't:
- [ ] game occasionally crashes when entering test menu?
- [ ] full screen mode is not tested at all due to monitor requirements
- [ ] need more polish (various options to control the behavior)
## Description of change
Add coin handling to SDVX BI2X. I also tried to populate the structs as
best I could.
## Testing
Tested via running spice2x on EG final, using F1 to insert coins.
## Link to GitHub Issue, if one exists
Fixes#512
## Description of change
Fix digital wailing not being recognized consistently.
Also address the fact that wailing was completely broken when lefty mode
was on. This requires a new option that the user needs to check off in
the configurator since we can't magically guess if the user is holding
the guitar in lefty mode.
- [x] fix downward wail
- [x] digital lefty mode
- [x] implement all of this for arena model i/o
- [x] test dx cab 2p
- [x] lefty toggle in overlay
- [x] fix analog not working for 2p guitar
- [ ] analog lefty mode?
## Testing
Checked GW and GW Delta
## Link to GitHub Issue, if one exists
#345
## Description of change
Turn existing warnings for DDR codec issues into deferred error
messages.
## Testing
Tested DDR World with faked codec issues.
bicarusandGitHub
WillandGitHub
ichijyo-hotaruandGitHub
Isaac DrewandGitHub