## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Debouce option for touch input. Applies to all touch handlers (rawinput,
win8, win7) since it sits at the touch layer, and then consumed by jb
touch logic.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
related to #697
## Description of change
Add a new option that paints touch targets and touch points for jubeat;
gets enabled if there is a touch screen connected. This is to help
explain / debug issues when users have their touch screen issues, which
is usually due to misalignment.
Fix the touch targets being off by 1 pixel (center gap is 1px wider in
both directions).
Also, simplify the `improved` algorithm to simulate a finger and trigger
nearest-neighbor for the AC dimensions. In terms of touch performance
this is near identical to what we had before, but it allows us to draw a
nice debug overlay instead of just grids.
## Testing
Tested portrait and landscape versions of jb.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Two changes:
1. Handle all HID events in `WM_INPUT` and not just the first one. This
only really affects 4000Hz / 8000Hz HID devices.
2. Go back to `3x3` as the default for rb IR touch emulation and remove
`1x1` as an option as it does not perform as well as I expected.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#603
## Description of change
Scanning for midi devices can take a while on Windows 11 with MIDI 2.0
service. Sometimes it'll take a couple seconds. Sometimes, on a PC with
zero MIDI devices, it takes 10-11 seconds.
This was causing two issues:
1. slow startup time
2. crash on invalid memory access due to a race condition
Address both.
Also fix a bug: when a device change event fires, we do a MIDI scan, and
invalidated all existing MIDI devices in favor of creating new handles.
Stop doing this, and instead check for duplicates by matching the ID and
keep existing device handles alone. Properly clean up devices on unplug.
Also: fix MIDI buttons being stuck on when unplugged while holding a
key.
## Testing
Tested with Nostroller in MIDI mode. rtpMIDI works too.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#697
## Description of change
Adds aspect-ratio compensation for raw input touch handler.
This addresses the problem with playing rawinput touch games - namely
jubeat and reflec beat - on a display that is not 16:9, and user chose
to preserve the aspect ratio. This happens a lot on:
* 16:10 touch screens
* touch screen laptops (which range from 3:2, 16:10, and so on).
Root cause is a **Windows Raw Input limitation**. Unlike
`WM_POINTER`/`WM_TOUCH`, where the OS already maps digitizer coordinates
to screen space (applying the display's calibration/scaling), Raw Input
delivers the HID digitizer's *raw* logical coordinates, spanning the
whole physical panel, with **no calibration or display-mapping data
attached**. We have to reconstruct that mapping ourselves.
When a game runs at a display mode whose aspect ratio differs from the
panel's native resolution, Windows scales the image with
letterboxing/pillarboxing (black bars). That is standard OS/GPU
behavior. Because Raw Input gives us no mapping to account for those
bars, touches land off-target. This change detects the mismatch and
remaps each touch from panel-space into the displayed image region;
touches inside the black bars are treated as released.
Adds new launcher option **`-rawtouchaspect`**.
Notes:
- Native resolution is the largest-area mode from `EnumDisplaySettings`
on the **primary** display, consistent with the existing primary-only
touch pipeline.
- Math assumes centered, aspect-preserving scaling; only one axis is
ever inset.
- A small epsilon (0.01) makes near-matched panels (e.g. 1366×768 vs
true 16:9) a no-op.
- If the user forces a stretched image, then the touches will be off
again. In this case, the user needs to use the `force off` setting.
## Testing
On my tiny Surface Go tablet,
* checked that jubeat squares align correctly
* good enough to full combo level 11 for reflec beat
## Link to GitHub Issue or related Pull Request, if one exists
#787
## Description of change
Updates usage of `windows_dll_compat_checker`
## Testing
it builds
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#787
## Description of change
Remove the call to `RegGetValueA` as it is Vista and up. Replace with
`RegOpenKeyExA` + `RegQueryValueExA`
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
`-network` and `-subnet` are poorly named. Add new names for them that
are more explicit.
Old command line parameters will continue to work, this is an additive
change.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
IIDX likes to call `CoCreateInstance` and `init` multiple times on ASIO
drivers, but some ASIO drivers like `Neva Uno` really don't like that
and ends up crashing. In our wrapper, cache the instances and try to
reuse them for better compatibility.
## Testing
Worked fine for FlexASIO / Xonar AE / Realtek ASIO though none of these
drivers repro the crashing behavior.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#779
Regressed by #720
## Description of change
#720 introduced a static dependency on DX9 which caused `d3d9.dll` to be
loaded at boot from `system32`. Some third party hooks (like
ifs_layeredfs and dxvk) rely on supplying a custom `d3d9.dll` in the DLL
search path (usually in modules) but this change caused Windows to skip
that check.
Remove the hard dependency on d3d9 and add a CMake check to ensure that
compiled binaries do not accidentally introduce new static imports in
the future.
## Testing
Confirmed that dxvk runs again.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds an option to disable Live2D. Can be disabled everywhere, or just
during a song.
## Testing
Tested EG final and recent Nabla.
## Link to GitHub Issue or related Pull Request, if one exists
regressed by #766, fixes#775
## Description of change
Some games like DDR leave `ShowCursor` ref count at non-negative number,
so when spice handles `WM_SETCURSOR` to change the cursor shape, it ends
up showing the OS cursor.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds an overlay window widget for controlling OBS over WebSocket.
Add new lines to the FPS widget that shows recording / streaming timers.
Show notifications for major state changes (stream started/stopped,
recording started/paused/resumed/stopped)
## Testing
I don't have a repro but a user reported that the cursor doesn't wrap
around on one side. Correctly account for windows bleeding over to other
monitors.
DLL hook options (-k and -z) allow multiple flags being specified in
both spicecfg and via command line; they never conflict as they are
additive. Remove the warning about option conflicts.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Similar to how it is on SDVX, turning this on can cause graphical
glitches depending on the GPU, so it needs to be an option that users
can toggle.
## Testing
After #739 there was a regression where the cursor visibility became
inconsistent if the FPS display was shown and then another overlay
window was toggled. Fix the imgui cursor toggle logic to only check for
the overlay layer visibility.
Only affects the caption bar.
Should work for:
- [x] standalone configurator
- [x] dx9 games, including multi-window games like gitadora
- [x] Unity games
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#762
## Description of change
Fix -nolegacy causing input to be not processed in spicecfg
Need to fix `run_cfg` and `CONFIGURATOR_STANDALONE` for real soon.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Fully flush `tmp` file and then use `MoveFileExW` instead of `CopyFileW`
which guarantees atomic operation on NTFS.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Building on #745
## Description of change
With `-wasapishared`, some users see `AUDCLNT_E_BUFFER_TOO_LARGE`
(`0x88890006`).
The existing one-device-period buffer clamp wasn't enough on endpoints
with a small shared buffer; the shared buffer is double-buffered, so a
full-buffer write often exceeds the free space.
### Fix
Added a FIFO bridge to `SharedRedirect` that decouples the game's
per-event writes from the shared engine's clock:
- **`GetBuffer`** hands the game a pointer into the FIFO tail to write
in place.
- **`ReleaseBuffer`** commits the write and drains `min(pending,
device_free)` frames to the device - so a write can never exceed what
the device accepts, structurally preventing the overflow on any
endpoint.
- **`GetCurrentPadding`** reports the FIFO fill level (capped to the
reported buffer size) so poll/timer-driven games pace correctly against
the virtual buffer.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#251
## Description of change
CCJ registers for rawinput mouse. We allowed the rawinput registration
to go through to the OS, which prevents spice's rawinput stack from
using the mouse. This caused the overlay to not accept mouse input. Fix
it by not letting the rawinput registration through. Luckily, mouse
input continues to work properly in CCJ (for touch).
Also, fix a bug in DX11 overlay when toggling the main menu.
## Testing
Enable left nav for Card tab, splitting the single page into multiple
sub tabs.
Card Manager is now embedded in this UI (but can still be launched as a
separate window)
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
For cab usage, when `-exec bm2dx.dll` is used without `-iidx` then
SOUND_OUTPUT_DEVICE never gets set.
Change this so that `SOUND_OUTPUT_DEVICE` gets set unconditionally if
`-iidxsounddevice` is set.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Combine API/Options/Advanced/Development/Search tabs into one Options
tab and add a left nav for navigation categories.
Reduce information density for options table by making each row double
the height and slightly increasing widget sizes.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
This new option, `-wasapishared`, detects when the game opens WASAPI
Exclusive stream and forcibly opens a shared mode stream instead on the
real device.
#### Benefits of this:
1. No need for `force wasapi shared` patches
2. No need to change sample rate of audio devices before starting up
games
3. Adds ability to boot in shared mode even for games that do not have
shared wasapi changes (old GITADORA, popn HC)
As a result, this option is strictly better than `shared wasapi` patches
available for many games.
#### Downsides:
1. OS resampling will add a small latency, but not big enough to be
noticeable.
2. Using shared mode instead of exclusive mode adds latency, of course.
(If you cared about latency, you would use the low latency option, or
use exclusive or asio)
Basically it's the "make things work" button for audio that should work
for almost all games that we support.
The option has no effect if the game opens in shared mode.
## Testing
SDVX7 - ok
GITADORA GW - ok
popn HC - ok
IIDX - ok
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Create three distinct layers for the overlay:
1. Bottommost persistent layer - non-interactable layer that is always
on. This was only for notifications, but now the FPS widget lives here
as well.
2. Overlay windows layer - most interactable windows go here.
3. Topmost main menu - this is reserved for the main menu (escape key)
and this is a modal dialog that occludes the layers below.
Why?
- `toggle overlay` behavior with FPS widget *also* toggling on/off was a
bit confusing (now they're two separate keys)
- FPS widget is popular, but it caused the entire overlay to be active,
which affects how input is handled
- the main menu being a standalone window was a little awkward (now it's
a modal)
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#737, regressed by #707
## Description of change
ImGui backend for DX11 pulled in dependency on a specific version of
`d3dcompiler_47.dll` which is not present on stock Win7 OS image.
Change this to a runtime load of the DLL and disable the overlay if we
can't find one.
## Testing
- [x] Win11, DX11 overlay
- [x] Win11, DX9 overlay
- [x] Win7, DX9 overlay
## Link to GitHub Issue or related Pull Request, if one exists
#730
## Description of change
Add an option that extracts channels from 7.1 ASIO and presents to 2-ch
ASIO. Same idea as the SDVX 2ch fix except for gitadora we are
duplicating the center channel to front.
## Testing
Tested SDVX and GFDM Arena.
## Link to GitHub Issue or related Pull Request, if one exists
#730
## Description of change
spicecfg is a 32-bit application. When it uses the ASIO SDK it only saw
the 32-bit drivers.
There are some ASIO drivers that have different names under 32-bit and
64-bit (Xonar AE is one of them)... so we have to manually scan the
registry and surface both the WOW32 and WOW64 nodes.
## Testing
<img width="329" height="309" alt="image"
src="https://github.com/user-attachments/assets/7abecf76-6835-4df5-8c2e-e7b425130f4c"
/>
Checked both 32-bit and 64-bit configurator, identical results.
## Link to GitHub Issue or related Pull Request, if one exists
#730
## Description of change
Flip the option - enable the Realtek hack by default, unless the user
chooses not to.
## Testing
Tested ASIO path and WASAPI path. WASAPI path should be unaffected as
the game just picks the default audio device.
## Link to GitHub Issue or related Pull Request, if one exists
#730, #718
## Description of change
Part 1)
When ASIO is in use, the game also looks for a Realtek device so that it
can open a WASAPI Exclusive mode stream for headphones.
Add an option to fake that, in case the user doesn't have a Realtek
device.
Part 2)
`-gdaasio` wasn't workign properly - fix the logic.
## Testing
Seems to work with FlexASIO, and Xonar with no real Realtek device.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Create `WrappedAsio`, similar to how we wrap `IAudioEndpoint`
So far, the wrapper does these things:
1. logging (for diagnosis, since iidx and gfdm don't produce any logs
when asio succeeds)
2. iidx32+ hack to work around refcount mismatch issue
3. sdvx valk cab hack to force 2-channel audio ("downmixing" by taking
only the front channels)
4. honor volume boost
As a result of `#2` the mempatch was removed from `iidx.cpp` since we
can tackle it cleanly in the hook. `#3` also removes the need for manual
patches.
Real downmixing is hard & expensive on the CPU so it was not
implemented.
## Testing
Tested iidx/sdvx/gfdm with xonar and flexasio
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Refuse to load if `libaio.dll` exists but `<spec>` is set incorrectly
(almost certainly because the user copied old prop files from downlevel
version)
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Resampler:
Implement resampler for exclusive mode streams, as we are seeing more
and more devices - not just laptops but onboard audio devices - that
only support 48khz and not 44.1khz. Should work with volume boost (gain
calculated inside resample) and also downmixer (hands off intermediate
scratch buffers).
Buffer size increase:
By default many of these games request a tiny buffer when in shared mode
(TDJ uses 3ms). On some audio setup this results in crackling due to
underflow. Add an option to forcibly increase the buffer size.
## Testing
With resampler set to 48kHz and buffer set to 20ms I can reliably boot
and play IIDX on my display port monitor's speakers; previously this
wasn't possible. IIDX is event-driven.
Tested SDVX7 as well at 48kHz, which opens timer-driven streams.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#154
## Description of change
Patch the game to skip over special holo printing logic and redirect to
the normal printer, resolving the soft lock + printer failure.
## Testing
Tested `NCG-2019012900`. Other versions might not work though since this
is patch-based not hook-based.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#717, fixes#647
## Description of change
Adds an option to downmix surround sound (5.1, 7.1, etc) down to stereo
(2 speakers). This can be used in most WASAPI games, including Gitadora
and FTT.
How it works: when the game tries to open surround format (say, 7.1) we
create a fake buffer and tell the game that it is supported. In reality
we open a 2-channel stream with the real sound card. When the stream
begins, we downmix the channels down to two (using one of many
algorithms) and output to the sound card.
While we're here, implement an option to boost the game volume by some
decibel value, which is a feature often requested by SDVX players. This
was needed since downmixing can sometimes result in quieter audio.
## Testing
Tested GW Delta and FTT.
Downmix doesn't work on IIDX (32 bits) but volume boost works.
## Link to GitHub Issue or related Pull Request, if one exists
#717
## Description of change
Add an option to override the ASIO device.
By default the game will try to use any ASIO driver that contains the
string `XONAR` in it.
## Testing
Tested with FlexASIO.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Move resize logic from `EndScene` to `Present`/`PresentEx` (resolves
Live2D frame drops in some extreme settings)
Plug small memory leak
Remove unnecessary surface Lock/Unlock
## Testing
Tested IIDX, SDVX, DDR.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Subscreen overlay window used to draw above the main game surface, but
below any other ImGui widgets. Fix this so that the subscreen image is
drawn at the same z-level as the sub window itself.
This has been a long-standing issue - at least since 2023 when spice2x
first forked...
## Testing
Tested TDJ in windowed mode.
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#134
## Description of change
Add ImGui DX11 backend implementation, and integrate into the spice
overlay.
The tricky part is that some of the Unity games:
1. Launch multiple windows, and
2. Can be resized (even full screen games launch at a certain resolution
and then expand to fit desktop resolution)
3. lazy load DX11 DLLs
This PR also adds screenshot functionality, but screen resize is not
implemented.
## Testing
Seems to be working for most games. Need to do final tests for:
- [x] CCJ (attract movie plays as well)
- [x] Busou Shinki (title movie plays)
- [x] MFG
- [x] QuizKnock
- [x] Polaris Chord
- [x] check dx9 for regression
## Link to GitHub Issue or related Pull Request, if one exists
#0
## Description of change
Combine the two layout options into one
## Testing
- [x] windowed, x4
- [x] windowed, x2
- [x] windowed, x1 with sub
- [x] fs
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Adds toast notifications to the overlay.
Toast notifications are transient windows (shown for about 4 seconds).
These are drawn on top of the game even when the overlay is inactive
(i.e., when no window is open), and does not cause any input sink
behavior.
Add toasts for some common user-driven actions that could use a
notification, such as:
* screenshot
* card insert
* PIN macro
* API client connect/disconnect
* virtual printer
* screen resize toggle / scene switch
Add an option to change where the toasts are displayed, or to turn it
off entirely.
Add SDK function for it, and add it to the samples.
## Testing
Tested DDR (shown at bottom right, as is for most games) and RB (shown
top right by default).
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Add two options:
1. option to adjust poll rate
2. option to change emulation size
Also, the default configuration is changing from:
* ~1000Hz ish to 120Hz (default)
* 3x3 point to 1x1 point
In theory this does not make a meaningful change to how the game plays.
But if people want the old behavior they can change it.
## Testing
Tested on Volzza2 and Reflesia.
## Link to GitHub Issue or related Pull Request, if one exists
#477
## Description of change
By default the game needs 4 monitors.
With the new option to disable subscreens, you can now boot fullscreen
with a single 4K monitor, with subscreen overlay enabled. Side monitors
are not shown in the overlay; only the touch screen is emulated.
## Future work
- [ ] custom resolution (-forceres) doesn't work properly (hooking
ResetEx does allow the game to boot but will render incorrectly;
probably needs hex edits)
- [x] enable this automatically if the user has fewer than 4 monitors
- [ ] ability to boot with a 4k main screen + small subscreen (with no
side screens which do nothing gameplay wise), but this whole display
emulation is a nightmare to work with & test thoroughly so it'll have to
be in the future.
## Testing
Checklist:
- [x] fs on 1 monitor with option set
- [x] fs on 2 monitor with option set
- [x] windowed - default (4 windows, no overlay)
- [x] windowed - with option set (1 window, overlay)
- [x] fs with 4 monitors?
- [x] check popn hc for regression
## Link to GitHub Issue or related Pull Request, if one exists
#694
## Description of change
Before this change, we have it set in the executable manifest to always
ask for UAC elevation.
This change removes that and instead attempts to prompt for elevation
when we launch, depending on the new developer option that is being
added here to run as current user instead of elevating.
The default behavior continues to run as admin. This is still the safest
in terms of regression risk.
A bit of history on this: while spicecfg never technically needed to
elevate, we continue to do so to avoid difference in behavior when the
game is launched. For example, if the user is using an input remapper
running without elevation, it would inject input into spicecfg running
as user but fail to do so if the game runs elevated.
WinXP builds are unaffected (there is no UAC).
Some features will straight up fail without elevation so this will
remain as a debug option. To name a few (not a complete list):
* reboot/shutdown of PC
* running at realtime process priority
* `-nvprofile` option
* ...
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Continuation of #682
## Description of change
RB uses SleepEx, so it was missed during the search while working on
#682.
## Testing
Plays about the same on a 200Hz touch monitor.
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
When booting in fullscreen, hide the subscreen from the alt+tab list and
from the task bar. Alt-tabbing to it does nothing, so this is just to
avoid confusion.
No change to windowed mode.
## Testing
Tested TDJ/SDVX/Popn. Didn't test Gitadora but it's probably fine..
## Link to GitHub Issue or related Pull Request, if one exists
n/a
## Description of change
Add a new option under `Monitor` group to change the monitor resolution
before booting the game, very similar to how orientation / refresh rate
options work.
This would be useful for games like Polaris Chord that boots at current
resolution but manages to have graphical issues when not in 1080p.
## Testing
## Link to GitHub Issue or related Pull Request, if one exists
Fixes#562
## Description of change
### rawinput touch fixes
In rawinput touch handler, if the mouse events (`WM_LBUTTONDOWN`,
`WM_MOUSEMOVE`, `WM_LBUTTONUP`) originated from a touch screen, drop
them on the floor instead of treating them as touch events.
This is an attempt to fix phantom touch issues we see with some screens.
Fix another issue where, if mouse is clicked inside the window, and then
dragged outside the window and button is released, touch point (id 0)
continues to be held.
### wintouchemu fixes
If we detected a touch input recently (500ms), ignore new mouse clicks.
This isn't perfect, but hopefully it helps with filtering out mouse
clicks originating from touch screens.
Also, switch over to detecting the primary mouse button correctly, not
just the left mouse button.
### notes
Future investigation: are there really touchscreens that report a mouse
HID capability & insert mouse events? We could have a way to filter them
at rawinput level but it'll be ugly.
## Testing
Tried jubeat, beatstream..
## Description of change
There was enough feedback that the current algorithm is not ideal for
most touch screens because most touch screens are not 24". In the
current algorithm touching the gap is no-op, so people think the game is
dropping touches.
This PR introduces a new algorithm that inspect touches on the gap and
triggers the nearest square.
## Testing
Tested landscape and portrait jubeat.
bicarusandGitHub